top of page
IMG_5162.heic

Battery Monitoring Systems

  • Product configuration for new systems​, such as Btechs, Alber, Vertiv and more

  • Reconfiguration for new layouts (i.e., reconfigure existing systems, or providing SPMI reconditioned equipment)​

  • Installation and commissioning​

  • Analysis of Alber & BTECH data, mining for critical discovery unavailable using the manufacturer's software - risk assessment

  • ​​Preventative maintenance / On-site troubleshooting and/or repair​

  • Spares for site exchange to keep systems operational​

  • Repairs services at our Carson City, NV location

Screenshot (9).png

01

BTECH S5 BATTERY MONITORING SYSTEM

BTECH’s flagship product is designed for various battery monitoring applications and can support up to 480 individual cells and eight strings per system. The S5 is the benchmark in design, application, and function for modern battery management systems.

02

BDS-40 Battery Monitoring System

Battery monitoring system that mounts to the top of a UPS battery cabinet and monitors 12 and 16 volt sealed batteries. The easy-to-use system tracks internal resistance, predicting and reporting failing conditions prior to complete...

Screenshot (7).png
BDSU50.jpg

03

Vertiv Albér BDSU-50 Universal Battery Diagnostic System

The Albér BDSU-50 is designed to be mounted on top of any brand of UPS battery cabinet or open rack, providing real time battery monitoring for 12V and 16V modules in series.

04

Albér BDSUi Integrated Battery Monitoring System

Albér BDSUi is designed specifically for factory integration into Liebert UPS battery cabinets, eliminating the logistics of field installation. The data center monitoring system provides detailed battery information, allowing for cost savings by optimizing useful battery life. Instead of waiting for an inevitable failure or replacing batteries prematurely to prevent problems, you can continue to utilize your batteries longer and with confidence by knowing their true internal condition.

cp-pcm-gl-508x635-alber-bdsu-50-both-units-uxim.jpg
Screenshot (11).png

05

BDS 256 & 256XL Battery Monitoring System

The BDS–256XL is a stand–alone battery monitor for UPS applications. It monitors 2V-16V batteries, however is optimized to monitor 2V VLA cells. The monitors check the state of health of each cell by performing a proactive resistance test, a reliable predictor of battery performance.

06

MPM-100 Battery Monitoring System

Diagnostic system designed for lower cell count applications such as telecom or stationary battery systems. Continuous data center monitoring potential problems using parameters such as cell voltage, overall string voltage, current and temperature. Automatic periodic tests of battery internal resistance verify the operating integrity of the battery.

mcm-mon-na-508x635-26483-mpm100.png
cp-pcm-gl-508x635-alber-uxim.jpg

07

Vertiv™ Albér™ Universal Xplorer Industrial Battery Monitor (UXIME)

The Albér™ Universal Xplorer Industrial Monitor (UXIME) is a stationary, real time battery monitor for use in Utility Bulk Power and Industrial applications. Standard configurations specifically designed for 120V and 48V batteries make it ideal for NERC compliance.

08

The Universal Xplorer Telecom Monitor (UXTM) is a stationary battery monitor designed for use in telecommunications or in DC powered data centers. The system architecture is a flexible design for monitoring virtually any battery configuration using VLA, VRLA or NiCd technologies in 24 to 48VDC applications.

cp-pcm-gl-508x635-alber-uxtm.jpg
  • LinkedIn

OVER 30 YEARS OF EXPERIENCE

LOCATION

963 Topsy Lane, STE 306-168

Carson City, NV 89705

© 2020 by SPMI

bottom of page