Battery Monitoring Systems.
Product configuration for new systems, such as Btechs, Alber, Vertiv and more
-
Reconfiguration for new layouts (i.e., reconfigure existing systems, or providing SPMI reconditioned equipment)
-
Installation and commissioning
-
Analysis of Alber & BTECH data, mining for critical discovery unavailable using the manufacturer's software - risk assessment
-
Preventative maintenance / On-site troubleshooting and/or repair
-
Spares for site exchange to keep systems operational
-
Repairs services at our Carson City, NV location
.png)
BTECH
BTECH S5 BATTERY MONITORING SYSTEM
BTECH’s flagship product is designed for various battery monitoring applications and can support up to 480 individual cells and eight strings per system. The S5 is the benchmark in design, application, and function for modern battery management systems.
LEGACY ALBER
BDS-40 Battery Monitoring System
Battery monitoring system that mounts to the top of a UPS battery cabinet and monitors 12 and 16 volt sealed batteries. The easy-to-use system tracks internal resistance, predicting and reporting failing conditions prior to complete...
.png)
VERTIV | ALBER
Vertiv Alber BDSU50 Universal Battery Diagnostic System
The Alber BDSU-50 is designed to be mounted on top of any brand of UPS battery cabinet or open rack, providing real time battery monitoring for 12V and 16V modules in series.
EMSYS
CSPY-400-2V(x12)
CellSPY Wireless | Wired Battery Monitor
Designed to measure and continuously report the following parameters:
DC voltage across the battery terminals
AC ripple voltage across the battery terminals
Battery’s ohmic value
Temperature at negative battery post
.png)
LEGACY ALBER
BDS 256 & 256XL Battery Monitoring System
The BDS–256XL is a stand–alone battery monitor for UPS applications. It monitors 2V-16V batteries, however is optimized to monitor 2V VLA cells. The monitors check the state of health of each cell by performing a proactive resistance test, a reliable predictor of battery performance.
LEGACY ALBER
MPM-100 Battery Monitoring System
Diagnostic system designed for lower cell count applications such as telecom or stationary battery systems. Continuous data center monitoring potential problems using parameters such as cell voltage, overall string voltage, current and temperature. Automatic periodic tests of battery internal resistance verify the operating integrity of the battery.
VERTIV | ALBER
Vertiv™ Albér™ Universal Xplorer Industrial Battery Monitor (UXIME)
The Alber™ Universal Xplorer Industrial Monitor (UXIME) is a stationary, real time battery monitor for use in Utility Bulk Power and Industrial applications. Standard configurations specifically designed for 120V and 48V batteries make it ideal for NERC compliance.
VERTIV | ALBER
The Universal Xplorer Telecom Monitor (UXTM) is a stationary battery monitor designed for use in telecommunications or in DC powered data centers. The system architecture is a flexible design for monitoring virtually any battery configuration using VLA, VRLA or NiCd technologies in 24 to 48VDC applications.
BTECH
A battery monitoring system that delivers quality and consistent data on smaller battery systems while complying with unique specifications and monitoring needs. The CELLQ1 is a cost-effective solution that monitors each battery unit to ensure it performs as specified by the manufacturer with great sensitivity, precision, and reliability
